Satellite Motors

Super Powerjack

Heavy Duty LINEAR ACTUATOR Arm Dish Mover (HD)

24" stroke length 36v Heavy Duty Actuator for use with C Band or KU Band (Prime Focus) Dishes up to 12'

FEATURE:
Adjustable Limit Switches
Up to 4500N Static Load
Reed Switch Sensor

Pulses per inch = 48
Corrosion Resistant

Can be used on solar panels as a solar panel motor for automatic sun tracking
 

Keywords: qarl3624, hv24

Bell / Dish Network Legacy SW21 Switch (SW 21) The SW21 multi switch enables you to receive satellite signals from 2 satellite locations to one Dish Network or Bell TV satellite receiver. The legacy SW21 switch combines two legacy dual LNBF's into one coax line. Permits voltage switching between 2 satellites. For a dual tuner receiver or 2 single tuner receivers, 2 of these are required.

HH100 Rotor SAT HH is a motor that allows to point any satellite dish towards all visible satellites in the polar orbit. The characteristics that make Rotor SAT HH particularly valid are as follows:

• Maximum precision
• Mechanical robustness
• Connection without external feeding, only by coaxial cable
• Reduced dimensions
• Maximum easiness of installation

Rotor SAT HH is directly controlled by DiSEqC1.2 or USALS compatible
receivers , where the rotation of the motor automatically begin when selecting
the required channel. For all those receiver not providet with DiSEqC, STAB has
developed the interfaces MS 220, MP 01, MP 02 (page.5) to drive the motors by
the Tv cable.

The mini-Positioner "MINI-POS MP02" is used by installers to perform a perfect and reliable DiSEqC 1.2 motorized system installation.

• Easy to use, it allows you to quickly aim a dish with the help of a field signal strength meter.

• The MP02 generate the following commands: GO EAST, GO WEST, GO TO "0" (South), and limit set. Allows you to store and recall up to 4 satellite positions directly from a PCI card, or DiSEqC 1.0 receiver. 

• It is connected between the motor and the receiver.

• "MINI-POS" enables you to peak the signal before storing first sat position in the receiver.  Once the signal is peaked, the rest of the satellites can be located using the USALS or DiSEqC 1.2 feature in the receiver.

• The MP02 is a perfect tool for receivers that don't have DiSEqC 1.2 or USALS capabilities.  It allows the receiver owner to add a DiSEqC 1.2 motor to move the satellite dish to up to 4 different satellites.

The DISH Pro Plus Quad allows you to pick up to 2 satellite locations and distribute them to up to 4 Bell or Dish Network Receivers

Benefits

• Connect up to 4 Bell TV or DISH Network single-tuner receivers
• Connect up to four Bell TV or DISH Network dual-tuner receivers

This LNB is used to feed multiple receivers. Its quad output will allow all the receivers to achieve a good signal quality at all times. it can be used in combination with DPP44 switch and feed many more receivers. 

Tech specs

• Captures both Dish or Bell Satellites
• Weather Proof
• Connects up to 4 Tuners
• Can be connected to DPP44 for even more connections

Brief Description

FEATURES:

SPECIFICATIONS:

Brief Description

With the SG2100 motorized system the dish moves from east to west to track the satellites positioned along the Clarke belt.  Good for any offset dish with a U-bolt or Pole mounting up to 120 cm satellite dish.

Works with all DiSEqC 1.2, 1.3,  Goto X compliant receivers. It utilizes a data stream passed up the LNB coaxial lead to the mount. Only one coaxial cable is needed for installation.

FEATURES:

• Fits all popular dish with 42mm tube
• Special Design for any Receiver with DiSEqC 1.2
• Only One Coaxial Cable Control
• Go To X Function
• High Efficiency
• Compact Structure
• Ultra Low Noise
• Adjustable Hardware Limits
• Easy Installation with LED Indicator
• Manual EAST / WEST button
• For Dish up to 1.2M

 
 


SPECIFICATIONS:

Keywords: satellite motor, dish motor