Products

DESCRIPTION:

High Quality SW22 22Khz Tone switch from ECODA with over 10 yrs manufacturing history and wide popularity among the North American & European FTA community. Works with DirecTV, Dish Network, Bell Express vu and all Free-To-Air satellites. Allows you to combine the signals from 2 different satellites into 1 receiver.

ECODA 2x1 22KHz tone switches automatically switch between two LNBs allowing reception from multiple satellites with any 22KHz compatible receiver.

Ecoda 22KHz tone switches are the most reliable switches on the market. We have load tested this switch with over 3 times the current draw rating and hot patched over 1000 cycles, which blew every other of the competition's switches leaving them dead ...... The Ecoda 22KHz switches kept reliably switching for thousands of cycles under this tremendous load!

1. Free-To-Air
* If you have only 2 LNBFs to switch between then this switch is a better option than DiSEqC 2x1 switch, since it switches far more reliably. 
* Allow you to combine the signals from 2 different satellites into one FTA satellite receiver. Compatible to all receivers with 22khz Tone, ToneBurst (Mini DiSEqC) and DiSEqC switching methods. 

2. DirecTV 
* Allow you to combine signal from DTV 101 and 119 satellites 
* Used to connect 2 LNBFs from 2 regular DirectTV 18" dishes or the DirecTV Plus Oval Dish pointing at 101 and 119 degree to one DirecTV receiver. 
* The DTV receiver sends out a 22khz tone to this switch to select between LNBF inputs. 

3. StarChoice 
* Allow you to combine signal from StarChoice 107 & 111 satellites. 
* Used to connect 2 LNBFs from 2 regular dishes or the Oval dish pointing at 107 and 111 degree to one receiver. 

4.  Combining ONE such switches with TWO 4x1 DiSEqC switch, you can connect up to 8 satellite legacy lnbs to your receiver!

Keywords: 22k, 22khz

4 MP Outdoor WDR Fixed Turret Network Camera Kit

• 1/3" (4 MP) Progressive Scan CMOS
• 2560 x 1440 (4 MP) Resolution
• 2.8 mm Fixed Lens
• EXIR 2.0 with 100 ft (30 m) IR Range
• H.265+/H.265/H.264+/H.264/MJPEG
• IP67 Protection • Durable Metal Housing
• 120 dB WDR for Clear Images
• Up to 8 MP Resolution Recording
• H.265+/H.265/H.264+/H.264/MPEG
• Plug-and-Play with 4, 8, or 16 PoE Cameras
• Up to 2 SATA Interfaces

• SAVES TIME AND MONEY: Why pull out the electrical outlet box? BestMounts Box Extender allows you to shim out those electrical boxes flush with the newly installed wall covering without removing or repositioning the existing electric box. It's easy to install.
• FITS ALL TYPES OF ELECTRIC OUTLET BOXES: Fits all outlet box styles, PVC, Metal, Fiberglass. New work, old work. It's the only extension rings or extenders to work with every style box made. It's the best electrical outlet boxes extender out there.
• FITS SNUGGLY: The patented rear flange allows BestMounts electrical box extender to fit snugly against every style box to assure no gaps are present between the existing box and your newly installed extender.
• SAFE: BestMounts are ETL Listed and made from non-flammable, self-extinguishing materials. Our outlet box extender meets all electrical codes. Since no gaps are present when properly installed, it gained the listing of Underwriters
• Laboratory.GREAT FOR BUILDING AND HOME IMPROVEMENT: Don't get surprised when you expose the box in the wall, with BestMounts  , the extender will fit! Extend the box flush with new wall covering without having to change the box or remove the device.
• Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a 1-1/2 Inch box extension)
• Manufactured from 94VO rated flame retardant plastic for safer installations, two hour fire rating

• SAVES TIME AND MONEY: Why pull out the electrical outlet box? BestMounts Box Extender allows you to shim out those electrical boxes flush with the newly installed wall covering without removing or repositioning the existing electric box. It's easy to install.
• FITS ALL TYPES OF ELECTRIC OUTLET BOXES: Fits all outlet box styles, PVC, Metal, Fiberglass. New work, old work. It's the only extension rings or extenders to work with every style box made. It's the best electrical outlet boxes extender out there.
• FITS SNUGGLY: The patented rear flange allows BestMounts electrical box extender to fit snugly against every style box to assure no gaps are present between the existing box and your newly installed extender.
• SAFE: BestMounts are ETL Listed and made from non-flammable, self-extinguishing materials. Our outlet box extender meets all electrical codes. Since no gaps are present when properly installed, it gained the listing of Underwriters
• Laboratory.GREAT FOR BUILDING AND HOME IMPROVEMENT: Don't get surprised when you expose the box in the wall, with BestMounts  , the extender will fit! Extend the box flush with new wall covering without having to change the box or remove the device.
• Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a 1-1/2 Inch box extension)
• Manufactured from 94VO rated flame retardant plastic for safer installations, two hour fire rating

• SAVES TIME AND MONEY: Why pull out the electrical outlet box? BestMounts Box Extender allows you to shim out those electrical boxes flush with the newly installed wall covering without removing or repositioning the existing electric box. It's easy to install.
• FITS ALL TYPES OF ELECTRIC OUTLET BOXES: Fits all outlet box styles, PVC, Metal, Fiberglass. New work, old work. It's the only extension rings or extenders to work with every style box made. It's the best electrical outlet boxes extender out there.
• FITS SNUGGLY: The patented rear flange allows BestMounts electrical box extender to fit snugly against every style box to assure no gaps are present between the existing box and your newly installed extender.
• SAFE: BestMounts are ETL Listed and made from non-flammable, self-extinguishing materials. Our outlet box extender meets all electrical codes. Since no gaps are present when properly installed, it gained the listing of Underwriters
• Laboratory.GREAT FOR BUILDING AND HOME IMPROVEMENT: Don't get surprised when you expose the box in the wall, with BestMounts  , the extender will fit! Extend the box flush with new wall covering without having to change the box or remove the device.
• Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a 1-1/2 Inch box extension)
• Manufactured from 94VO rated flame retardant plastic for safer installations, two hour fire rating

• SAVES TIME AND MONEY: Why pull out the electrical outlet box? BestMounts Box Extender allows you to shim out those electrical boxes flush with the newly installed wall covering without removing or repositioning the existing electric box. It's easy to install.
• FITS ALL TYPES OF ELECTRIC OUTLET BOXES: Fits all outlet box styles, PVC, Metal, Fiberglass. New work, old work. It's the only extension rings or extenders to work with every style box made. It's the best electrical outlet boxes extender out there.
• FITS SNUGGLY: The patented rear flange allows BestMounts electrical box extender to fit snugly against every style box to assure no gaps are present between the existing box and your newly installed extender.
• SAFE: BestMounts are ETL Listed and made from non-flammable, self-extinguishing materials. Our outlet box extender meets all electrical codes. Since no gaps are present when properly installed, it gained the listing of Underwriters
• Laboratory.GREAT FOR BUILDING AND HOME IMPROVEMENT: Don't get surprised when you expose the box in the wall, with BestMounts  , the extender will fit! Extend the box flush with new wall covering without having to change the box or remove the device.
• Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a 1-1/2 Inch box extension)
• Manufactured from 94VO rated flame retardant plastic for safer installations, two hour fire rating

• SAVES TIME AND MONEY: Why pull out the electrical outlet box? BestMounts Box Extender allows you to shim out those electrical boxes flush with the newly installed wall covering without removing or repositioning the existing electric box. It's easy to install.
• FITS ALL TYPES OF ELECTRIC OUTLET BOXES: Fits all outlet box styles, PVC, Metal, Fiberglass. New work, old work. It's the only extension rings or extenders to work with every style box made. It's the best electrical outlet boxes extender out there.
• FITS SNUGGLY: The patented rear flange allows BestMounts electrical box extender to fit snugly against every style box to assure no gaps are present between the existing box and your newly installed extender.
• SAFE: BestMounts are ETL Listed and made from non-flammable, self-extinguishing materials. Our outlet box extender meets all electrical codes. Since no gaps are present when properly installed, it gained the listing of Underwriters
• Laboratory.GREAT FOR BUILDING AND HOME IMPROVEMENT: Don't get surprised when you expose the box in the wall, with BestMounts  , the extender will fit! Extend the box flush with new wall covering without having to change the box or remove the device.
• Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a 1-1/2 Inch box extension)
• Manufactured from 94VO rated flame retardant plastic for safer installations, two hour fire rating

The Multi-Gang Non-Metallic Box Extender is designed to mount on non-metallic boxes to bring flush to the surface. This item is gangable, allowing configurations between 1-5-Gangs. Made of durable PVC material, the box extender is non-conductive and non-corrosive making it safe to install and resistant to weather and temperature.
Easily make 2, 3, 4 or 5-gang extension
Includes box extenders and  #6-32 x 1-3/4 in. screws
Will not rust or conduct electricity

BestMounts 1-Gang Electrical Power Outlet Box Extender - White, (360-Pack) with 6-32 Flat Head screws

• Allows the contractor to comply with 2005 NEC Article 314 20
• Works in handy boxes and 4-Inch square electrical boxes with plaster rings for single switches or receptacle
• Manufactured from 105-Degree C continuous use 94-Volt rated flame retardant plastic for safer installations
• Functions with all standard devices, switches and GFCIs
• Levels and supports the wiring device where the box is set back from the wall surface adjusts up to a 1-1/2-Inch box extension
• LOOSE OUTLET or RECESSED ELECTRICAL OUTLET BOX? Our electrical outlet extender and light switch extender is the perfect solution! Much easier to install than an outlet extender box.
• INSTALLED A NEW TILE, STONE or GRANITE BACKSPLASH? Our electrical outlet extenders for tile backsplash will finish off your awesome new project. The perfect wall plate spacer for outlets.
• NO ELECTRICIAN NEEDED! You don’t have to call an expert to come install an outlet box extender or outlet extension box. Our electric box extenders are easy to install and include outlet screws long enough for even the thickest tile!
• UNIVERSAL FIT: Works perfect as a single gang box extender or as a 2 gang outlet extender. Single switch plate extender or multiple switch plate extender. 

Electrical Power Outlet Box Extender

1-Gang, White

The purpose of this Electrical Box Extender is to allow you to pull out your electrical box so that it lays flush with the newly installed wall covering, without having to remove or re-positioning the existing box.

• Allows you to correct setbacks and insulate devices with an easy installation design
• Used for extending set back electrical boxes up to 1-1/2-inches, levels and supports wiring device
• Automatically levels and supports outlets, switches, GFCIs, and other standard devices
• Works with handy boxes and 4-inch square electrical boxes with plaster rings for single switches
• Used for extending set back electrical boxes up to 1-1/2-inch, levels and supports wiring device

• Frequency Range: 950 - 2300 MHz
• Insertion Loss: 5 dB Typ (950-2300 MHz)
• Isolation Between Inputs: 25 dB min.
• Inputs from LNB: 4
• Outputs to Receiver: 1

5in/1out DiSEqC 2.0 switch for up to 4 satellite positions and 1 subscriber, equipped with combiner for terrestrial band. It is designed for switching between 3 or 4 LNBs, which are addressed in receiver's menu as DiSEqC 1.0 setting A/B/C/D.
The product allows joining terrestrial band to common downlead.

Specifications

• Frequency range:
  - LNB inputs: 950-2300 MHz 
  - Terrestrial input: 5-862 MHz
  - Output: 5-2300 MHz
• Control: DiSEqC 1.0 (2.0) commands
• Insertion loss:
  - Satellite: 6 dB avg
  - Terrestrial: 2 dB avg
• Sat. inputs isolation: 25 dB min
• Power consumption:
  - From receiver: 35 mA (18 V) + LNB
  - LNB current: 400 mA max
• Dimensions (w,d,h): 11.2 x 11.2 x 4.8 cm
• Temperature range: -30 ~ +70 °C

Plug Adapter USA Canada

Converts Euro/Asian plug to North American Plug
Input: 2 Prong Flat (male)

Output: 2 Prong Round Receptacle (female)

Note: This is only a plug adapter. It does not change or convert the voltage from 220V to 110V or 110V to 220V.

Features:

• Input: Accepts 2 round prong European, Asian or African plug
• Input: Accepts 2 angled flat prong Australian or Chinese plug
• Output: two flat prongs - USA
• Note: Plug adapters do not convert voltage, they just change the plug type. Use a proper voltage converter along with a plug adapter if your device is incompatible with the country's voltage.

Plug Adapter USA Canada

Extra Strong Garbage Bags - (26 in. x 36 in.) pack of 150

F Double Male

F TYPE COUPLER MALE TO MALE

Keywords: cable, cat 6 cable, cat 5 e cable, bulk cable, rg 6 cable, rg 59 cable, coxial cable, data cable, ethernet cable, network cable

Flush to Inner Surface Bulk Wire wall Plate - Single Gang - White

Flush to Inner Surface Bulk Wire wall Plate - Single Gang - White

Can be used as a antenna combiner

• Bandwidth: 0 - 1000 MHz
  
• Combiner: 2-input and 1-output

The  Focus  antenna Combiner provides a 1GHz bandwidth and is ideal for antenna and coaxial cable operations. The combiner can be used to combine signals from two sources onto one coax run.

• Provides 1GHz bandwidth
• Ideal for antenna and coaxial operations
  

Keywords: best-8hd-180d, focus8hd90d, db8e, db8, 4228, cm4228, cm-4228, 4228hd, cm4228hd, cm-4228hd

Keywords: best1018

The Focus Antennas   Mast is 1x 5' 18 Gauge high quality galvanized steel mast that works with all Focus Antennas , Channel Master antennas and mast mounts. Great for attic, rooftop, chimney, and wall installations.

The 5’ Antenna Mast is a 5-foot long, 18-gauge, galvanized steel antenna mast with swedged end. 

Swedged end for easy expansion 

Outer diameter: 1.66"

Size (product)     60 x 1.25 x 1.25 in 

Package size for Shipping          60 x 4 x 4 in 

Weight (product)                       6 lb   

Keywords: best1018

The Focus Antennas   Mast is 2x 5' 18 Gauge high quality galvanized steel mast that works with all Focus Antennas , Channel Master antennas and mast mounts. Great for attic, rooftop, chimney, and wall installations.

The 5’ Antenna Mast is a 5-foot long, 18-gauge, galvanized steel antenna mast with swedged end. 

Swedged end for easy expansion 

Outer diameter: 1.66"

Size (product)     60 x 1.25 x 1.25 in 

Package size for Shipping          60 x 4 x 4 in 

Weight (product)                       8 lb   

• Accepts Mast up to 2.5-Inch in Diameter
• Lag bolts are included
• U-Bolt with V-Block
• Standoff from wall: 3-Inch
• Install any masted antenna to any wall.

USES of LTE 4G Filter

• Used to filter out LTE signal used by 4G broadband broadcasts
• The product is fitted to the cable coming from a TV aerial to block out this interference
• In cases of very high levels of interference 2 filters be screwed together inline to roughly double the filter effect

ADVANTAGES of LTE 4G Filter

• It is highly effective, giving a filter effect of between 35 - 55dB and above
• It is far more effective than 'at 800' approved filters
• It can be used indoors or outdoors
• It comes with an F-type connector which gives a superior connection

The HAMZA range of mast mounted amplifiers has been completely Brand New engineered and updated.These HAMZA amplifiers represent the ultimate in preamplifier performance.

• Makes up for signal loss from long cables and splitters
• Optimum filtering for rejection of out-of-band signals.
• Lock in those hard to get stations by placing this as close to the antenna as possible
• HAMZA AMPLIFIER has a Heavy Duty die-cast aluminum housing fully shielded, weather proof enclosure
• Surface-mounted components for automated production and consistent high performance.

1. UHF/VHF/FM TV Antenna Amplifier with Integrated LTE Filter
2. • VHF and UHF bands combined amplification • Gain: VHF 30 dB - UHF 30 dB
3. Adjustable gain (18 dB/30 dB)
4. • Includes a switchable FM trap 
5. • Outdoor rated housing 
6. • Mast mounted amplification unit with indoor power supply which connect via coaxial cable

The HAMZA range of mast mounted amplifiers has been completely Brand New engineered and updated.These HAMZA amplifiers represent the ultimate in preamplifier performance.

Professional Outdoor TV Antenna Amplifier

• Makes up for signal loss from long cables and splitters
• Optimum filtering for rejection of out-of-band signals.
• Lock in those hard to get stations by placing this as close to the antenna as possible
• HAMZA AMPLIFIER has a Heavy Duty die-cast aluminum housing fully shielded, weather proof enclosure
• Surface-mounted components for automated production and consistent high performance.

• VHF and UHF bands combined amplification • Gain: VHF 30 dB - UHF 30 dB
• Includes a switchable FM trap 
• Outdoor rated housing 
• Mast mounted amplification unit with indoor power supply which connect via coaxial cable

Delivers the best possible signal quality 

• Optimized for digital reception and outperforms many larger antennas
• Receives Crystal Clear UHF/VHF HDTV Signals
• Supports all digital and analog TV frequencies including VHF, UHF  signals
• Extended range with signal reception quality up to 65+ miles
• Ultra-small design needs less than 1 meter of space for placement where traditional antennas do not work
• Easily installs outdoors or in attic 
• (J-Mount and coaxial cable sold separately).

Reduce Your Monthly TV Bill to $0

You can now experience HDTV in the highest quality picture and sound available. Over-the-air broadcasts are transmitted in crystal clear Full HD 1080; far less compressed than what cable and satellite offer. Many local broadcasts are digitally aired in 5.1 Surround Sound giving you the ultimate sound stage for watching live television. With a digital antenna you can receive free local news, weather, kids shows, sports, cooking, shopping, and sitcoms from networks like CBC, CTV,Global, CHCH, TvoKids,Omni1,Omni2,CityTV,,ABC, NBC, CBS, FOX, PBS, CW, ION, and much more with no cost or contracts. And broadcast TV won't be interrupted from service drop outs (ehemm satellite). Quick fact: local sports are broadcast free over-the-air. You just need an antenna.