Products

• Mounting bracket has Oval holes that allow final shifting and straightening
• Easy to install, for mounting low voltage wires(phone, internet, TV, video)
• Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened
• Bracket is its own template for cut-out, trace the bracket then cut the hole
• Horizontal or vertical mounting, installs faster and costs less than metal brackets,
• Designed to mount wall plates flush
• Adjusts to fit 1/4-inch to 1-inch thick wall board, paneling, or drywall
•  

Keywords: 1-gang drywall bracket face wall plate mount mud ring low voltage

BestMounts 1-Gang Screw Less Recessed Low Voltage Cable Wall Plate (1-Pack) with Best Low Voltage Mounting Bracket (1-Pack)

Tired of messy cables cluttering up your home theater? Give it a professional look with BestMounts Recessed Low Voltage Cable Plate and Bracket. These plates are designed to hide low voltage cables behind your wall mounted display, amplifier, or other audio and video devices. This quick and easy installation will completely transform the look of your home theater setup.

• Designed for use with HDMI, coax, data, voice, and other low-voltage cabling
• Cable scoop mounts directly to the Mounting Bracket 
• Conceals low voltage audio video cables behind wall mounted flat panel TVs, amplifier, and other audio and video devices
• Can be installed with the opening facing up or down
• Holds up to 4 cables
• Mounting bracket included

NEW Articulating 13"-30" LCD Plasma LED TV WALL MOUNT TILT
Condition : Brand New
Brand : BEST VIEW MOUNTS
Colour : Black
Recommended Screen Size : 13 - 230 Inch
Weight Capacity : 33 lb. / 15kg
Distance From Wall : 81mm - 390mm
Vertical Tilt : 15 Degree
Horizontal Swivel : 180 Degree
VESA Compliant : 100x100mm, 75x75mm

Main

• TV Sizes: 23 to 47"
• Weight Capacity: 45 kg / 99 lb
• VESA Standard(s): 100x100mm / 200x100mm / 200x200mm / 300x200mm / 300x300mm / 400x200mm / 400x400mm

Features

• Motion Type: None
• Distance from Wall to TV: 2.3 cm / 0.9 in
• Level Bubble Meter: Yes

Mounting

• Wall Studs Required: 2
• 16" Stud Spacing: Yes
• 24" Stud Spacing: No
• Wall Plate (Length x Width): 44.0 x 15.0 cm / 17.3 x 5.9 in
• Height of TV Bracket Rails: 42 cm / 16.5 in

Physical

• Colour: Black
• Materials: Solid Steel

Shipping

• Dimensions (Length x Width x Height): 45 x 16 x 3 cm / 17.7 x 6.3 x 1.2 in
• Weight: 1.5 kg / 3.3 lb

Includes

• Wall Mounting Hardware: Yes
• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

Keywords: best-62, best 62, best62, bvm-62, bvm 62, bvm62

BestMounts 23-55 inch TV Articulating Fullmotion Wall Mount - Up to lb (50 kg) 110lbs BVM-23

Main

• TV Sizes: 23 to 55"
• Weight Capacity: 50 kg / 110 lb
• VESA Standard(s): 100x100mm / 200x100mm / 200x200mm / 300x200mm / 300x300mm / 400x200mm / 400x400mm

Features

• Motion Type: Full-Motion
• Tilt Angle: ± 12° Up-Down
• Swivel Angle: ± 90° Left-Right
• Distance from Wall to TV: 5 to 55 cm / 2.0 to 21.7 in

Mounting

• Wall Studs Required: 1
• Wall Plate (Length x Width): 30 x 7 cm / 19 x 9 in

Physical

• Colour: Black
• Materials: Solid Steel

Shipping

• Dimensions (Length x Width x Height): 45 x 32 x 7 cm / 17.7 x 12.6 x 2.8 in
• Weight: 5 kg / 11 lb

Includes

• Wall Mounting Hardware: Yes
• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

BestMounts 23-55 inch TV/Monitor Articulating (Swinging) Wall Mount - Up to 66 lb (30 kg)

FULL MOTION - SWIVEL MOUNT

1. Fits 23 - 37"
2. VESA Standard, Horizontal: VESA 75, 100, 200; Vertical: VESA 75, 100, 200
NOTE: Can handle max of 8"x8" hole patterns

For 10"-37" LCD
Aluminum Tilting & Swivel Wall Bracket
Tilt: 12 degree down, 2 degree up

Swivel: 180 degree
VESA: 75*75/100*100/100*200/200*200MM
Profile: 85-513mm
Includes additional VESA adaptor plate
Cable management
kg

Quick Overview

Will it fit my screen?It's pretty easy to work out if this bracket will fit your screen:
1. First just measure your screen, the bracket is 710mm wide and the arm height is 530mm so as long as the outside of the screen is wider and taller than that, the bracket will not poke out the sides.
2. Check the mounting holes on the back of the screen and measure how far apart they are. The bracket will fit screens with mounting holes a maximum of 700mm wide and 415mm high (centre to centre of the hole)
Mount your Big Screen Plasma or LCD on the wall.
This extra heavy duty bracket is perfect for mounting your big LCD or PLASMA to the wall. It's a tilt type bracket, which allows you to tilt your screen up to 15 degrees up or down to best suit your viewing position. it also includes a dual articulated arm, which allows you to pull the screen out from the wall and face it in virtually any direction you want!
New model suitable for stud walls
The back plate, which mounts to the wall, on this model is 630mm wide (effective max hole spacing 600mm) perfect for homes with stud walls with a maximum stud spacing of 600mm. This type of bracket can retail for anything up to 800!
Sounds like a ridiculous claim doesn't it? How could we possibly be selling something that expensive so cheap?
Simple really, here's why you get the same quality from us, for much cheaper EVERYDAY!
- Most retailers work on huge margins, we don't! We have a lot lower margin in order to offer our customers the best value we can every day. - A regular retail item generally has an Importer, Distributor and then a retailer all adding a profit margin. We Import these brackets directly in bulk and keep them in our Melbourne warehouse. You purchase direct from the importer and save!
Features:
- STRONG DUAL ARM / DUAL PIVOT
- TILT 15 DEGREE
- SWIVEL 60 DEGREE
- STRONG thick steel construction
- Reversible so it can swing from either left or right
- Built-in spirit level for more accurate installation
- Easy to install
- Brand New In Box
- Fixings supplied for most common installations

Keywords: best007

Will it fit my screen?It's pretty easy to work out if this bracket will fit your screen:
1. First just measure your screen, the bracket is 810mm wide and the arm height is 53cm so as long as the outside of the screen is wider and taller than that, the bracket will not poke out the sides.
2. Check the mounting holes on the back of the screen and measure how far apart they are. The bracket will fit screens with mounting holes a maximum of 770mm wide and 475mm high (centre to centre of the hole)
Mount your Big Screen Plasma or LCD on the wall.
This high quality bracket is perfect for mounting your new LCD or PLASMA to the wall. It's a fixed type bracket,
This model makes installation easy!
It has a locking bar which does not need to be put into place until you are total done with the installation. That means you can hook it on at the top AND still gain access at the bottom to attach cables before installing the locking bar. Other models can be hard to mount because you need to attach the cables before you lift the plasma up onto the bracket, which can be a lot harder than it sounds! This model can also take a lock for extra security!
Features:
- Lockable for extra security! (Lock shown in images not included)
- Easy to install
- Brand New In Box
- Fixings supplied for most common installations When buying a low profile bracket like this it is important to consult the manual for your TV first.
A lot of TV's are not suitable to mount as close to the wall as this bracket is because they need to vent heat. If that's the case with your plasma then you may be better off with our TILT version.
As with all wall brackets it is essential that this bracket is fixed to a timber stud when mounting on plaster board walls. Check out our stud finder below.

Please Note:
Some panels require M6 16mm bolts which are not included. Where we try to include all fastenings needed, due to the large number of panels on the market we sometimes can't cater for all. Please check manufacturers specifications of screen prior to installing. Other sellers are charging way too much to ship similar brackets, why get ripped off!

Keywords: best65

• Universal support for large LED , Curved  plasma and LCD TVs
• Designed for 37 "-80" TVs

Plasma & LCD Tilt TV Wall Mount Bracket 15° Tilting 37-80"

Universal LCD/Plasma Wall Mount Bracket

Suite TV Size from 37" to 80", weights 165lb./75 kg

Tilt: -15 to +15 degrees

Durable powder-coated finish (black )

Compliant to VESA standard 600 x 400 Max

TV is mounted 80mm off wall

English user manual included in each packaging

All mounting accessories included in each packaging

Keywords: best2

Multi-Screen Mount
Features:
? Suit for four 13"-24" LED/LCD monitors
? Maximum capacity 10kg per monitor
? Monitor bracket compliant to VESA 75x75 and 100x100
? Place the monitors on the desktop freely with weighted base
? Mounting heads can be tilted up and down 180 degree
? Solid aluminum and heavy gauge steel construction for stable installation
? Height adjustable for best viewing angle

BestMounts 42-80 inch TV Tilting Wall Mount Bracket- Up to 165 lb (75 kg)

Quick Overview

• Condition : Brand New
• Brand : Best Mounts
• Colour : Black
• To Fit : Up to 80 inch
• Weight Capacity : 75 kg / 165 lb
• Width : 1200mm
• Height : 510mm
• Distance from wall : 75mm
• Tilt Option : 15 Degree

Extra Large Version of our most popular mount
This larger version of our standard mount is perfect for larger TV's 50 inch and bigger, or TV's with wider mounting holes such as some big LG and Sharp models which have mounting holes wider than the normal bracket can accommodate. This bracket also up to 75 kg capacity for even more peace of mind.

Mount your Big Screen Plasma or LCD on the wall.
This high quality bracket is perfect for mounting your new LCD or PLASMA to the wall. It's a tilt type bracket, which allows you to tilt your screen up to 15 degrees up or down to best suit your viewing position.

This model makes installation easy!
The ability to tilt upward means you can mount your screen first then hook it up. Other models can be hard to mount because you need to attach the cables before you lift the plasma up onto the bracket, which can be a lot harder than it sounds! This model can also take a lock for extra security!

Will it fit my screen?
It's pretty easy to work out if this bracket will fit your screen: 1. First just measure your screen, the bracket is 1000mm wide and the arm height is 700mm so as long as the outside of the screen is wider and taller than that, the bracket will not poke out the sides. 2. Check the mounting holes on the back of the screen and measure how far apart they are. The bracket will fit screens with mounting holes a maximum of 1000mm wide and 
800mm high (centre to centre of the hole)

Cable Pass-through Wall Plate, Brush Style, Single Gang Decora - White In-Wall Installation

Designed for the Installation of Low Voltage Cables and Wires Perfect for Flat Panel TV’s and Audio/Video Devices Flush Mounting to Gang Boxes or Wall Plate Brackets Clean and Easy Installation For Use with Speaker Wires, Coaxial, HDMI and Network/Phone Cables

Product Highlights

Get interact with your TV for more fun! The counterbalance ergonomic arm provides maximum flexibility for freely positioning and excellent features that distinguish greatly from a normal arm. Each arm can hold screen up to 20kgs (44lbs). Built-in spring tension gauge can be easily adjusted to fit varied weights that arm holds. Advanced VESA plate includes -15° to +15° of fingertip tilt that enable both sit to stand and touch screen applications. The plate also allows +3°~-3° screen level adjustment. A hidden cable management integrated in arm easily conceals cables beneath channel covers.

• The counterbalance ergonomic arm will provide maximum flexibility for freely positioning, both vertically and horizontally.
• Built-in spring tension gauge can be easily adjusted to fit varied weights the arm holds.
• Adjustable structure allows freely tilting for 15° up and down
• The hidden cable management integrated in arm easily conceals cables beneath channel covers

Main

• TV Sizes: 37 to 60"
• Weight Capacity: 60 kg / 132 lb
• VESA Standard(s): 200x200mm / 300x200mm / 300x300mm / 400x200mm / 400x400mm / 600x200 / 600x300 / 600x400mm

Features

• Motion Type: Full-Motion
• Tilt Angle: ± 12° Up-Down
• Number of Shelves: 1

Physical

• Colour: Onyx Black
• Materials: Steel and Tempered Glass
• Panel height adjustment promotes a customized placement to match different viewing needs anytime.
• Assembled (Width x Depth x Height): 90.0 x 50.0 x 137.0 cm / 35.4 x 19.7 x 53.9 in

Includes

• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

Keywords: stand-46, stand 46, stand46, beststand46

The Multi-Gang Non-Metallic Box Extender is designed to mount on non-metallic boxes to bring flush to the surface. This item is gangable, allowing configurations between 1-5-Gangs. Made of durable PVC material, the box extender is non-conductive and non-corrosive making it safe to install and resistant to weather and temperature.
Easily make 2, 3, 4 or 5-gang extension
Includes  box extenders and  #6-32 x 1-3/4 in. screws
Will not rust or conduct electricity

BestMounts 1-Gang Electrical Power Outlet Box Extender - White, (2-Pack) with 6-32 Flat Head screws

• Allows the contractor to comply with 2005 NEC Article 314 20
• Works in handy boxes and 4-Inch square electrical boxes with plaster rings for single switches or receptacle
• Manufactured from 105-Degree C continuous use 94-Volt rated flame retardant plastic for safer installations
• Functions with all standard devices, switches and GFCIs
• Levels and supports the wiring device where the box is set back from the wall surface adjusts up to a 1-1/2-Inch box extension
• LOOSE OUTLET or RECESSED ELECTRICAL OUTLET BOX? Our electrical outlet extender and light switch extender is the perfect solution! Much easier to install than an outlet extender box.
• INSTALLED A NEW TILE, STONE or GRANITE BACKSPLASH? Our electrical outlet extenders for tile backsplash will finish off your awesome new project. The perfect wall plate spacer for outlets.
• NO ELECTRICIAN NEEDED! You don’t have to call an expert to come install an outlet box extender or outlet extension box. Our electric box extenders are easy to install and include outlet screws long enough for even the thickest tile!
• UNIVERSAL FIT: Works perfect as a single gang box extender or as a 2 gang outlet extender. Single switch plate extender or multiple switch plate extender. 

Electrical Power Outlet Box Extender

1-Gang, White

The purpose of this Electrical Box Extender is to allow you to pull out your electrical box so that it lays flush with the newly installed wall covering, without having to remove or re-positioning the existing box.

• Allows you to correct setbacks and insulate devices with an easy installation design
• Used for extending set back electrical boxes up to 1-1/2-inches, levels and supports wiring device
• Automatically levels and supports outlets, switches, GFCIs, and other standard devices
• Works with handy boxes and 4-inch square electrical boxes with plaster rings for single switches
• Used for extending set back electrical boxes up to 1-1/2-inch, levels and supports wiring device

The Multi-Gang Non-Metallic Box Extender is designed to mount on non-metallic boxes to bring flush to the surface. This item is gangable, allowing configurations between 1-5-Gangs. Made of durable PVC material, the box extender is non-conductive and non-corrosive making it safe to install and resistant to weather and temperature.
Easily make 2, 3, 4 or 5-gang extension
Includes box extenders and  #6-32 x 1-3/4 in. screws
Will not rust or conduct electricity

BestMounts 1-Gang Electrical Power Outlet Box Extender - White, (5-Pack) with 6-32 Flat Head screws

• Allows the contractor to comply with 2005 NEC Article 314 20
• Works in handy boxes and 4-Inch square electrical boxes with plaster rings for single switches or receptacle
• Manufactured from 105-Degree C continuous use 94-Volt rated flame retardant plastic for safer installations
• Functions with all standard devices, switches and GFCIs
• Levels and supports the wiring device where the box is set back from the wall surface adjusts up to a 1-1/2-Inch box extension
• LOOSE OUTLET or RECESSED ELECTRICAL OUTLET BOX? Our electrical outlet extender and light switch extender is the perfect solution! Much easier to install than an outlet extender box.
• INSTALLED A NEW TILE, STONE or GRANITE BACKSPLASH? Our electrical outlet extenders for tile backsplash will finish off your awesome new project. The perfect wall plate spacer for outlets.
• NO ELECTRICIAN NEEDED! You don’t have to call an expert to come install an outlet box extender or outlet extension box. Our electric box extenders are easy to install and include outlet screws long enough for even the thickest tile!
• UNIVERSAL FIT: Works perfect as a single gang box extender or as a 2 gang outlet extender. Single switch plate extender or multiple switch plate extender. 

Electrical Power Outlet Box Extender

1-Gang, White

The purpose of this Electrical Box Extender is to allow you to pull out your electrical box so that it lays flush with the newly installed wall covering, without having to remove or re-positioning the existing box.

• Allows you to correct setbacks and insulate devices with an easy installation design
• Used for extending set back electrical boxes up to 1-1/2-inches, levels and supports wiring device
• Automatically levels and supports outlets, switches, GFCIs, and other standard devices
• Works with handy boxes and 4-inch square electrical boxes with plaster rings for single switches
• Used for extending set back electrical boxes up to 1-1/2-inch, levels and supports wiring device

The BPM-003 is a projector mount which designed for most of projectors up to 33lbs/15kgs with tilt degree from -20° to +20° and is constructed from heavy gauge steel for total support and durability. Allows extension up to 130mm from your ceiling.

• Medium size projector ceiling mount
• Holds most projectors up to 33lbs/15kgs
• Tilt degree from -20° to +20°
• Extension from ceiling up to 130mm
• Made from heavy gauge steel

BestMounts Single Layer Dvd Wall Shelf (FOCUS-DVD-1)

Tidy up annoying home entertainment clutter with this floating media player shelf by BestMounts. It mounts easily on the wall and can safely hold a DVD player, Blu-ray player, or any other media device that's up to 10kg (22lbs) in weight.

Extruded aluminum construction provides extreme rigidity and sleek, modern styling.

Built-in wire management system protects and  conceals cables. 

Easy to mount the shelf on the wall with  provided wall-mounting bracket. 

Tempered glass available in black color. 

BestMounts  Tilt angle adjustable monitor laptop stand BLS-001

BestMounts Triple Monitor Mount Stand Free Standing Mount Option Supports up to 13- 24"

Freestanding Desk Mount for Triple Monitors

Multi-Screen Mount
Features:
? Suit for three 13"-24" LED/LCD monitors
? Maximum capacity 10kg per monitor
? Monitor bracket compliant to VESA 75x75 and 100x100
? Place the monitors on the desktop freely with weighted base
? Mounting heads can be tilted up and down 180 degree
? Solid aluminum and heavy gauge steel construction for stable installation
? Height adjustable for best viewing angle

BestMounts Triple Monitor Mount Stand Free Standing  Mount Option Supports up to 3 27"

Multi-Screen Mount
Features:
? Suit for three 13"-27" LED/LCD monitors
? Maximum capacity 10kg per monitor
? Monitor bracket compliant to VESA 75x75 and 100x100
? Place the monitors on the desktop freely with weighted base
? Mounting heads can be tilted up and down 30 degree
? Solid aluminum and heavy gauge steel construction for stable installation
? Height adjustable for best viewing angle

LED/LCD MONITOR ARMS Free Standing with Curved Arms

Universal TV Table Top Stand / Base Mount For most 37" - 65" LED, LCD flat panel TVs up to 35KG/77lb

• COMPATIBILITY - TV tabletop stand fits screens from 22" to 65" in size with mounting holes between 75mm x 75mm and 800mm x 400mm
• STRENGTH TESTED - Solid steel legs hold weights up to 110 lbs
• OPTIMUM BALANCE – By design BVM provides a greater level of support and balance than your TV’s original base
• NO SCRATCH – Bottom feet are padded to protect furniture surfaces
• EASY SETUP - Simple TV attachment process with all necessary hardware provided

Universal TV Table Top Stand / Base Mount For most 37" - 65" LED, LCD flat panel TVs up to 35KG/77lb

• COMPATIBILITY - TV tabletop stand fits screens from 22" to 65" in size with mounting holes between 75mm x 75mm and 800mm x 400mm
• STRENGTH TESTED - Solid steel legs hold weights up to 110 lbs
• OPTIMUM BALANCE – By design BVM provides a greater level of support and balance than your TV’s original base
• NO SCRATCH – Bottom feet are padded to protect furniture surfaces
• EASY SETUP - Simple TV attachment process with all necessary hardware provided

BestMounts Universal Table Top TV Stand / Base Mount fits 37"-55" up to 35KG/77lbs for LED, LCD 

Vesa : 200X200, 300X300,400X400,

• Fit 32"-55"TV--For Most 32 to 50 inch Flat Curved Screen TVs ,VESA Patterns 200x200/300x200/300x300/400x200/400x300/400x400
• Height Adjustable - TV bracket is height adjustable! 3 positions to suit different applications or TV sizes. The TV can be raised to install a sound bar or game console 
• Safety Design & Weight Capacity --88 lbs weight loading capacity. Thick and black 8mm safety tempered glass shelf built up a strong tv stand base to support your TVs
• Universal Fit- TV mounting bracket is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse27, 30, 32, 36, 37, 40, 42, 47, 48, 49, 50,50 and some up to55 inch TVs. Please ensure your TV has VESA 400x400mm pattern or smaller
• TV Stand- Universal TV stand/base tabletop stand to mount your TV and AV components on an entertainment center or a desk/table. 8 mm thick sleek tempered glass shelf can store your cable tv box, satellite receiver, gaming consoles such as PS4, Xbox, or Apple TV

Keywords: tabletop mount, tv wall mount base

BestMounts Universal Table Top TV Stand / Base Mount fits 37"-65" up to 35KG/77lbs for LED, LCD (BUM-302)

Universal TV Stand/Base Tabletop TV Stand with Mount for up to 50 inch Flat Screen Tvs Vizio/Sumsung/Sony Tvs/Xbox One/tv Components Max VESA 400x400 x 400x600

• VESA COMPATIBLE - Universal TV mounting bracket design fits most of 32'' to 65" LCD/LED/Plasma TVs on the market up to VESA 600x400 and weighing up to 88 lbs. Fits VESA 600x400, 500x400, 400 x400 400x300, 400x200, 300x300, 200X200). Please check VESA (mounting hole pattern behind TV), possible blocked cable/input and TV weight prior to making purchase
• HEIGHT ADJUSTABLE - TV bracket is height adjustable! 3 positions to suit different applications or TV sizes. The TV can be raised to install a sound bar or game console sensors like the Kinect.
• UNIVERSAL FIT - TV mounting bracket is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse 27,30, 32, 36, 37, 40, 42, 47, 48, 49, 50, 55,60 and some up to 65 inch TVs. Please ensure your TV has VESA 400x600mm pattern or smaller
• TV STAND - Universal TV stand/base tabletop stand to mount your TV and AV components on an entertainment center or a desk/table. 8 mm thick sleek tempered glass shelf can store your cable tv box, satellite receiver, gaming consoles such as PS4, Xbox, or Apple TV
• Masterfully Hide your Wires! - No need to see those wires anymore! A specially designed wire management is made to hide all your wires. Power cords, HDMI cables and the like are well hidden from view. This also enables you to hide the wires without going through the wall and making holes and or hiring an electrician to do it.

BestMounts VESA Adapter Mount Bracket Kit for Non VESA HP ACER Samsung Dell Asus Monitors 13 to 30 inch VESA 75x75 and VESA 100x100, Black  (BNVKIT-15)

DESCRIPTION Adapter for monitors without mounting holes

- Fit monitor with following sizes: Height between: 11.5 inch to 19.2 inch

Overal thickness from 1 inch to 2.75 inch

- Generally, most widescreen monitors from 20 inch to 30 inch

- This adapter is designed to fit any VESA mount with 75x75mm and 100x100mm mounting holes

• NON VESA MONITOR ADAPTER - These monitor arm adaptors allow mounting non-VESA monitors to VESA monitor mount desk and wall mounts. Designed to fit any VESA monitor mount with 75x75 and 100x100mm mounting holes, and includes all required screws and other hardware for assembly.
• UNIVERSAL VESA MOUNT KIT- Designed for Dell, Samsung, HP, Acer, Asus, AOC, Viewsonic monitors that do not have a standard bolt hole pattern. Adjustable monitor arm adapters can be placed in many positions to accommodate varying sizes and shapes of monitors
• WIDE COMPATIBILITY - Fits screen thickness of 1 inch to 2.75 inches and bezel height from 10.5 inches to 16.25 inches. Arms can be rotated up and down to adapt to different monitor sizes. NOT RECOMMENDED FOR CURVED MONITORS
• HEAVY-DUTY - Powder coated steel design is heavy duty and can carry up to 17.6 Lb monitors. Attach this well constructed monitor mount kit to your current VESA mount to securely hold your non-vesa monitor

• Not all monitors on the market come with bolt holes in the back that would allow them to mount VESA compatible monitor desk mounts and stands. These monitors cannot be mounted to an ergonomic desk stand or to a wall, preventing them to be used in cleaner set ups and more productive and ergonomic multi-monitor set ups. MI-9000 VESA adaptor attaches to your non-VESA compatible monitor and allows it to be connected to the industry-standard monitor desk mounts and stands.