Products

Full Motion LCD/Plasma TV Wall Mount Bracket

Fits up to 19" - 37" TV's

Tilts 15-degrees up or down

Swivels 90-degrees left and right

Distance from wall to TV is 8-27cm

1 wall stud is required for mounting

Wallplate: 12cm x 6cm

Made of solid steel

Black

Includes:
- Wall mounting hardware
- Assembly instructions

VESA Standards:
50x50mm / 75x75mm / 100x100mm / 200x100mm / 200x200mm

cUL Listed

6 Month Warranty

• High quality car cigarette lighter adaptor (12~24v DC)
• Rapidly charge your battery
• Intelligent IC chip inside to prevent overcharging and short circuit
• LED charging indication
• Compact, lightweight and easy use

Black Universal Speaker Stands

• Suitable for the vast majority of surround speakers
• Easy to assemble
• Concealed cable management  
• Decorative matt black appearance

Black Universal Speaker Mounts

• Suitable for the vast majority of surround speakers

Black Universal Speaker Wall Mount brackets

• Dimensions: H90mm x W50mm x D60mm
• Can bear weight up to 8kg
• These Universal Speaker Wall Mount Brackets are designed fit Home Cinema Speaker systems
• Pan/Tilt multi angle adjustable
• Fits all Single point speakers (i.e. 1 Screw thread in rear)
• Simple installation
• Comes in a pack of 2 speaker brackets
• Discreet and tilt swivel design
• Full installation kit supplied, which includes brick/ studded wall screws/wall plugs and speaker to bracket screws
• Dimensions: H90mm x W50mm x D60mm
• Movement allowing an extra: Down 20°, Up 20°, Left/ Right 180°
• Can hold weight up to 8 kilos
• Colour: Black
• Guaranteed to fit or your money back

LVWP-BLKD is a 2 gang non-metallic low-voltage mounting bracket 

Dual Multipurpose Drywall Mounting Wall Plate

designed to support the mounting of Class 2 communications computer and TV wiring wall plates The LV2 is designed to support existing construction installations where a mounting bracket is needed to mount home theater wall plates data wall plates audio video wall plates and any other 2 gang low voltage plates The innovative mounting wings on the LVWP-BLKD ensure the bracket is securely attached to the wall

The LVWP-BLKD will allow you to mount plates flush against the wall while giving them the support needed for long lasting durable installations The LVWP-BLKD brackets are simple to install and allow for a better-looking professional installation

Product Features:

For communications cable TV home theater and computer wiring

Adjust to fit 1/4" to 1" thick wallboard paneling or drywall

Bracket is its own template for cut out

Mounting wings hold bracket securely to wall

Specifications:

Double Gang

Non-metallic

Part: LVWP-BLKD 

Package contents:

Includes: 1 LVWP-BLKD Low Voltage Mounting Bracket

Single Gang Low Voltage Mounting Bracket 24 Pack 1 Gang Mounting Bracket for Telephone Wires, Network Cables, HDMI Cables, Coaxial Cables, Speaker Cables 

Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket – (Single Gang, 24 Pack)

BestMounts - 1-Gang Low-Voltage Old-Work Bracket is specially designed for the installation of Low-Voltage devices in an existing wall.
The backless box design accommodates the space and bend-radius requirements of coaxial or data/communication cables and
eliminates the need for metal plates, lags or screws. Non-metallic PLASTIC resists rust, corrosion, impact and the
damaging effects of sunlight.

Specifications & Features:

• Aids in the installation of low-voltage devices such as a cable television, data communication or telephone jacks in an existing wall
• Can be installed vertically or horizontally
• 2-vertical screw-mount options
• Quick and easy to install

• SINGLE-GANG Low Voltage Backless Old Work Bracket- Designed for low-voltage devices in an existing wall
• EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video)
• COST-EFFECTIVE 24-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office
• PVC CONSTRUCTION for durable performance. Installs vertically or horizontally. Lifetime Warranty
• PACKAGE INCLUDE: 24 Pack - Single Gang Low Voltage Bracket, Mounting Screws Included

Keywords: 1 gang low voltage mounting bracket

Single Gang Low Voltage Mounting Bracket 48 Pack 1 Gang Mounting Bracket for Telephone Wires, Network Cables, HDMI Cables, Coaxial Cables, Speaker Cables 

Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket – (Single Gang, 48 Pack)

BestMounts - 1-Gang Low-Voltage Old-Work Bracket is specially designed for the installation of Low-Voltage devices in an existing wall.
The backless box design accommodates the space and bend-radius requirements of coaxial or data/communication cables and
eliminates the need for metal plates, lags or screws. Non-metallic PLASTIC resists rust, corrosion, impact and the
damaging effects of sunlight.

Specifications & Features:

• Aids in the installation of low-voltage devices such as a cable television, data communication or telephone jacks in an existing wall
• Can be installed vertically or horizontally
• 2-vertical screw-mount options
• Quick and easy to install

• SINGLE-GANG Low Voltage Backless Old Work Bracket- Designed for low-voltage devices in an existing wall
• EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video)
• COST-EFFECTIVE 48-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office
• PVC CONSTRUCTION for durable performance. Installs vertically or horizontally. Lifetime Warranty
• PACKAGE INCLUDE: 48 Pack - Single Gang Low Voltage Bracket, Mounting Screws Included

Best Mounts - Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket – (Single Gang, 96 Pack)

Single Gang Low Voltage Mounting Bracket 96 Pack 1 Gang Mounting Bracket for Telephone Wires, Network Cables, HDMI Cables, Coaxial Cables, Speaker Cables 

Low Voltage Mounting Bracket 1 Gang Multipurpose Drywall Mounting Wall Plate Bracket – (Single Gang, 96 Pack)

BestMounts - 1-Gang Low-Voltage Old-Work Bracket is specially designed for the installation of Low-Voltage devices in an existing wall.
The backless box design accommodates the space and bend-radius requirements of coaxial or data/communication cables and
eliminates the need for metal plates, lags or screws. Non-metallic PLASTIC resists rust, corrosion, impact and the
damaging effects of sunlight.

Specifications & Features:

• Aids in the installation of low-voltage devices such as a cable television, data communication or telephone jacks in an existing wall
• Backless to accommodate deep devices and bend-radius requirements
• Can be installed vertically or horizontally
• 2-vertical screw-mount options
• Quick and easy to install

• SINGLE-GANG Low Voltage Backless Old Work Bracket- Designed for low-voltage devices in an existing wall
• EASY TO INSTALL - Fully adjustable, ideal solution for mounting low voltage wires (phone, internet, TV, video)
• COST-EFFECTIVE 96-PACK of low voltage mounting brackets is enough for a few renovation projects at home or in the office
• PVC CONSTRUCTION for durable performance. Installs vertically or horizontally. Lifetime Warranty
• PACKAGE INCLUDE: 96 Pack - Single Gang Low Voltage Bracket, Mounting Screws Included

This BESTMOUNTS BLM-235  Full-Motion wall mount is designed for most 19" to 37" flat-panel TVs up to 55lbs/25kgs with tilt degree from 0 to +10 degree, swivel degree up to 180 degree, and is constructed from heavy gauge steel for total support and durability. Articulated arm allows movement of TV up to 445mm from wall, also an innovative locking mechanism gives quick and easy installation..

• Medium size full-motion wall mount
• Holds most 19 inch to 37 inch flat-panel TVs up to 55lbs/25kgs
• Tilt degree from -10 to 0 degree
• Universal up to VESA 200 x 200 compliant
• Extension from wall up to 455mm
• Made from heavy gauge steel

Will it fit my screen?It's pretty easy to work out if this bracket will fit your screen: 1. First just measure your TV, the bracket is 400mm wide and the arm height is 400mm, so as long as the TV is wider and taller than that, the bracket will not protrude from the sides or the top/bottom. 2. Measure the mounting holes on the back of your TV. The bracket will fit screens with mounting holes a maximum of 400mm wide and 400mm high (centre of hole to centre of hole). Mount your Big Screen Plasma or LCD from the CEILING!
This high quality bracket is perfect for mounting your new LCD or Plasma to the ceiling. Perfect for situations where you cannot mount to a wall. For instance in a corner, in front of a glass wall (or other unsuitable wall), or where there is no wall on which to mount.
Height Adjustable
The extension pole is 40mm in diameter and incrementally adjustable from 570mm to 800mm (to the centre of the bracket), allowing for a suitable drop to suit various situations. The bracket can also tilt forward up to 15 degrees to assist in achieving the best viewing position.
Features:
- 15 degrees vertical tilt
- 360 degrees rotation
- Height adjustable
- Easy to install
- Brand New In Box
- Screws / fixings supplied for most common installations
- Colour: Black

Keywords: bcm107

Will it fit my screen?It's pretty easy to work out if this bracket will fit your screen: 1. First just measure your TV, the bracket is 765mm wide and the arm height is 530mm, so as long as the TV is wider and taller than that, the bracket will not protrude from the sides or the top/bottom. 2. Measure the mounting holes on the back of your TV. The bracket will fit screens with mounting holes a maximum of 720mm wide and 480mm high (centre of hole to centre of hole). Mount your Big Screen Plasma or LCD from the CEILING!
This high quality bracket is perfect for mounting your new LCD or Plasma to the ceiling. Perfect for situations where you cannot mount to a wall. For instance in a corner, in front of a glass wall (or other unsuitable wall), or where there is no wall on which to mount.
Height Adjustable
The extension pole is 40mm in diameter and incrementally adjustable from 570mm to 800mm (to the centre of the bracket), allowing for a suitable drop to suit various situations. The bracket can also tilt forward up to 15 degrees to assist in achieving the best viewing position.
Features:
- 15 degrees vertical tilt
- 360 degrees rotation
- Height adjustable
- Easy to install
- Brand New In Box
- Screws / fixings supplied for most common installations
- Colour: Black

Keywords: bcm109

Main

• TV Sizes: 42 to 80"
• Weight Capacity: 75 kg / 165 lb
• VESA Standard(s): 200x200mm / 300x200mm / 300x300mm / 400x200mm / 400x400mm / 600x200mm / 600x300mm / 600x400mm / 600x600mm / 800x200mm / 800x400mm

Features

• Motion Type: Full-Motion
• Tilt Angle: ± 15° Up-Down
• Swivel Angle: ± 45° Left-Right
• Distance from Wall to TV: 9.9 cm to 50.0 cm / 3.9 to 19.7 in
• Level Bubble Meter: Yes

Mounting

• Wall Studs Required: 2
• 16" Stud Spacing: Yes
• 24" Stud Spacing: Yes
• Wall Plate (Length x Width): 90 x 20 cm / 35.4 x 7.9 in
• Height of TV Bracket Rails: 42.5 cm / 16.7 in

Physical

• Colour: Black
• Materials: Solid Steel

Shipping

• Dimensions (Length x Width x Height): 94 x 27 x 12 cm / 37.0 x 10.6 x 4.7 in
• Weight: 13.5 kg / 29.8 lb

Includes

• Wall Mounting Hardware: Yes
• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

Keywords: best-26, best 26, best26, bvm-26, bvm 26, bvm26

Best Mounts  CupHolder Phone Mount | Buy One, Get One 50% Off

Best Mounts Car Cell Phone Cup Holder Mount for Apple iPhone XS XS Max XR X 8 8Plus 7 7 Plus 6s 6 5s SE, Samsung S9 S9Plus and more

Easy Installation with Expandable Cupholder

This phone mount requires virtually no installation. It comes with a universal cup holder that is specially designed to expand and fit any cupholder in any type of vehicle. Just place it in your cup holder, expand, lock it in, and you’re all set. No rattling. No loose phone. Just a hands-free phone anywhere you want it.

Heavy Duty Material that’s Gentle on Your Phone

Our cupholder phone mount is made of high-grade material that includes padded side grips for extra protection of your phone. It’s designed to keep your phone in place without scratching or damage while keeping it safe from getting knocked, pushed or sliding out.

360° Rotatable Cradle

Cell phones weren’t designed to stay still and they shouldn’t have to be locked into position just because you’re in a vehicle. Our 360° rotatable cradle feature gives you full-range of motion and allows you to decide where you want your phone while keeping it stable and secure in your position of choice.

Fully-Adjustable Mount

Some phone mounts don’t make it easy to fit your phone case and require you to remove it in order to fit your phone. Our handy phone holder comes with a fully-adjustable mount so you can securely fit any phone and its case without leaving it out of position or otherwise insecurely mounted. Just place your phone in the holder and adjust the mount until your phone is locked into position and you’re ready to go.

Quick Release Button

If you’ve ever found it frustrating that your car phone mount requires two hands to pop your phone out without dropping it, you’re not alone. Our quick release feature takes the struggle out of removing your phone from its mount with a single hand and the push of a button.

Charging Slot

Being able to charge your phone while it’s mounted should be a no brainer, but some phone mounts make this a lot harder than it should be. The Showcase Cupholder Phone Mount comes with an accessible charging slot that lets you plug it your phone while it’s mounted without making an effort.

Sleek Design

The Showcase CupHolder Adjustable Phone Mount is designed to blend into your interior while providing practical use any time you need it. It’s the perfect addition to your phone and your vehicle, and the only phone mount you’ll ever need for your car, boat, RV, and even at your desk. This product makes a great gift for commuters, new car owners, and friends & family. Happy travels!

13" - 24" Full Motion Monitor Desk Dual-Arm Mount - Black 

Keep your 13" to 24" monitor in place with this Best View Mounts Dual-Arm Desk Mount. It holds up to 22lbs., features a swivel degree of up to 90 degrees, and provides support and durability thanks to heavy gauge steel construction. An innovative locking mechanism makes it quick and easy to install.

• Medium-sized desk mount holds most 13" to 24" monitors up to 22lbs.
• Tilts from -90 to +90 degrees and swivels from 180 degrees
• Features a universal mounting pattern up to VESA 100mm x 100mm

BestMounts  Recessed adjustable tilting/swiveling wall mount bracket can easily fit to the wall between the two vertical studs with 16" on-center spacing and is perfect for LCD/LED/plasma TV.

BestMounts Recessed adjustable tilting/swiveling wall mount bracket is suitable for wood stud walls with 16" on-center spacing and is ideal for LCD/LED/plasma TV. Wall mount bracket is perfect for brick/concrete walls and includes mounting hardware.

Weight capacity: Up to 135 lbs.
- Tilt angle: -5 - 15 deg.
- Swivel angle: 180 deg, +or-5 deg horizontal angle adjustment to ensure a level display.
- Fits into wall between two vertical studs with 16" on-center spacing, display with a VESA mounting patterns from 100 x 100 to 600 x 400.
- Mount attaches directly to the studs for exceptional stability and security.

Best Mounts Car Phone Mount CD Slot Car Mount CD Phone Holder Telephone Holder iPhone Holder Cell Phone Car Mount with 360 Degree Rotaion

Best Mounts Tilt TV Wall Mount For Flat Screen PLASMA LCD LED Television 42" To 70"   Up to 165 lb (75 kg)

Keywords: tv wall mounts, tilting wall mounts, flush tv wall mounts

Universal Sound bar Sound Bar Bracket Mount

its almost any TV and sound bar/ speaker |VESA compliant: 200x100, 200x200, 300x300, 400x200, 400x400, 600x400mm|Mounts above or below TV

Universal Sound bar Bracket This Universal sound bar bracket lets you hang your sound bar above or below your LCD TV. This VESA compliant sound bar bracket is designed to work with almost any TV and sound bar. Constructed with high quality steel the brackets will hold up to 33lbs. Easy installation takes only minutes. How To Install Your Sound bar This sound bar bracket can be used for TV’s on a stand or wall mounted. Installation is simple and takes only a few minutes. First look at the mounting holes on your TV and sound bar then determine how to position the brackets to fit the mounting holes. Use the included hardware to attach the brackets to the TV. Lightly tighten the screws so the brackets can still be adjusted. Then attach the sound bar to the brackets and lightly tighten the screws. Make sure the position of the sound bar is correct then tighten the all screws and you are done. Note: Your sound bar needs to have mounting screw posts in order to be compatible with this product, make sure to confirm that before purchasing. Specifications Fits almost any TV and sound bar/ speaker VESA compliant: 200x100, 200x200, 300x300, 400x200, 400x400, 600x400mm Mounts above or below TV Holds speakers up to 33 lbs. Bracket Length: 17 inch and 6.5 inch Wide at widest point. All mounting screws included.

BEST 43 is design to fit most 32″-70″ LED, LCD Flat Panel TVs up to 50kgs/110lbs. A tilting mount is recommended when reflections from windows or lighting interfere with TV viewing or when multiple viewing angles are desired. Adjustable structure allows freely tilting for 15°down for viewing ease and enjoyment. Lateral shift allows the TV to move left and right on the wall plate so it’s placed exactly where you want it. Compatible with VESA hole up to 400×400. BEST-43 is designed to accommodate 16″ and 24″  Stud spacing.

BEST TRIPOD STAND  BRACKET ONLY FOR TV Mount for 32″ – 55″ TVs BTP-001

BEST TRIPOD STAND BTP-001 is design to fit most 32″-55″ LED, LCD Flat Panel TVs up to 50kgs/110lbs. This Tripod mount is an easy solution for trade shows and Places where hard to install TV on Walls. Its compact design makes it easy for travel . Adjustable structure allows freely tilting for 15°down for viewing ease and enjoyment. it has height adjustment from 1200mm(3.93ft) to 1900mm(6.2ft) which makes it unique for multiple applications . Compatible with VESA hole up to 400×400.

BEST TRIPOD  STAND BTPS-002  is design to fit most 32″-65″ LED, LCD Flat Panel TVs up to 50kgs/110lbs. This Tripod mount is an easy solution for trade shows and Places where hard to install TV on Walls. Its compact design makes it easy for travel . Adjustable structure allows freely tilting for 15°down for viewing ease and enjoyment. it has height adjustment from 1200mm(3.93ft) to 1900mm(6.2ft) which makes it unique for multiple applications . Compatible with VESA hole up to 400×400.

• Custom made design suitable for most LCD projectors
• Unique, beautifully designed metal adjustable arms
• Includes both a short ceiling mounting tube
• Tilt angle +/-15 degrees

Universal Projector Ceiling Mount

• Custom made design suitable for most LCD projectors
• Unique, beautifully designed metal adjustable arms
• Includes both a short ceiling mounting tube
• Tilt angle +/-15 degrees
• One screw installation allows easy removal of projector
• Can be adjusted in all directions
• 360 degree swivel
• Max load capacity: 14 kg (30lb.)
• All ceiling fittings are included

Our mounts have some features below,

1.Product:Mounts are made up to aluminium alloy and solid heavy-gauge cold-rolled steal constructions,Durable powder coated finish for surface dealing. Safety, dust-proof and easily to clean.

2.ROHS : Our material are up to the ROHS standard.

3.ISO :CQC certification systems were carried out.

Keywords: bmp001

• Custom made design suitable for most LCD projectors
• Unique, beautifully designed metal adjustable arms
• Includes both a short ceiling mounting tube
• Tilt angle +/-15 degrees

Universal Projector Ceiling Mount

• Custom made design suitable for most LCD projectors
• Unique, beautifully designed metal adjustable arms
• Includes both a short ceiling mounting tube
• Tilt angle +/-15 degrees
• One screw installation allows easy removal of projector
• Can be adjusted in all directions
• 360 degree swivel
• Max load capacity: 14 kg (30lb.)
• All ceiling fittings are included

Our mounts have some features below,

1.Product:Mounts are made up to aluminium alloy and solid heavy-gauge cold-rolled steal constructions,Durable powder coated finish for surface dealing. Safety, dust-proof and easily to clean.

2.ROHS : Our material are up to the ROHS standard.

3.ISO :CQC certification systems were carried out.

Keywords: bmp002

• EASY HEIGHT ADJUSTMENT: It features a telescoping center column that is adjustable ranging from 40’’ to 71’’ inch high. Secured it with the sturdy pin and screw locks. The rugged and durable metal construction tubing for safe and long term use.
• TRIPOD LEG DESIGN: Center brace connects tripod legs for increased stability. The tripod speaker stands collapse easily to fit inside the bag for easy transportation. It can hold speakers of up to 143 lbs. firmly and steadily for better sound effect.
• 35mm COMPATIBLE INSERT: The 6′ ft. speaker stand holder mount works with all speakers with 35mm compatible insert. An ideal heavy duty audio stand for loud music, pa speakers, studio monitor and more.
• TENSION LOCKING MECHANISM: Built with knob style tension locking mechanism that hold the maximum weight of a speaker attached to the stand. It also supports the height of the speaker stand and prevent it from collapsing.
• NON SLIP FEET: Pyle features universal floor standing speaker stand as well as non-slip rubber feet. The equal length distribution makes the base extremely stable and safe. Perfect for on-stage or in-studio use.

• ORGANIZE CABLES - The perfect solution for concealing up to 4 low voltage audio/video cables behind your wall-mounted flat panel TV (may hold more than 4 cables depending on type)
• THE PERFECT MATCH - These cable plates and brackets have been tested and paired in multiple applications and are a guaranteed fit!
• SAFETY CERTIFIED - Mounting bracket is ETL Listed for Class 2 low voltage cables (not rated for passing AC power chords)
• Can be installed with the opening facing up or down
• Made of durable ABS plastic

Main

• TV Sizes: Up to 60"
• Weight Capacity: 60 kg / 132 lb

Features

• Number of Shelves: 3

Physical

• Colour: Mahogany Brown and Black
• Materials: Steel Frame, Wood Base and Tempered Glass Shelving
• Assembled (Width x Depth x Height): 125.0 x 48.0 x 50.0 cm / 49.2 x 18.9 x 19.7 in

Shipping

• Dimensions (Length x Width x Height): 140 x 60 x 15 cm / 55.1 x 23.6 x 5.9 in
• Weight: 31 kg / 68 lb

Includes

• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

Keywords: stand-51, stand 51, stand51, beststand51

Main

• TV Sizes: Up to 60"
• Weight Capacity: 60 kg / 132 lb

Features

• Number of Shelves: 3

Physical

• Colour: Onyx Black
• Materials: Steel Frame, Wood Base and Tempered Glass Shelving
• Assembled (Width x Depth x Height): 125.0 x 48.0 x 50.0 cm / 49.2 x 18.9 x 19.7 in

Shipping

• Dimensions (Length x Width x Height): 140 x 60 x 15 cm / 55.1 x 23.6 x 5.9 in
• Weight: 31 kg / 68 lb

Includes

• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

Keywords: stand-52, stand 52, stand52, beststand52

Main

• TV Sizes: Up to 70"
• Weight Capacity: 60 kg / 132 lb

Features

• Number of Shelves: 3

Physical

• Colour: Black
• Materials: Steel Frame, Wood Base and Tempered Glass Shelving
• Assembled (Width x Depth x Height): 152.4 x 51.8 x 50.8 cm / 60.0 x 20.4 x 20.0 in

Shipping

• Dimensions (Length x Width x Height): 165 x 60 x 15 cm / 65 x 23.6 x 5.9 in
• Weight: 43 kg / 95 lb

Includes

• Assembly Instructions: Yes

Warranty

• 1 Year Limited: Covers materials and workmanship against manufacturing defects during the course of normal usage

Keywords: stand-72, stand 72, stand72, beststand72